Need help?Do you have a question about the Hirschmann RSPE 35 and is the answer not in the manual?
General| Model | RSPE 35 |
|---|---|
| Number of Ports | Up to 28 ports |
| Mounting | DIN Rail |
| Protection Class | IP30 |
| Port Type | 10/100/1000BASE-TX, 100/1000BASE-FX, SFP slots |
| Uplink Ports | Up to 4 x 100/1000BASE SFP slots |
| Power Supply | 24 V DC |
| Operating Temperature | -40°C to +70°C |
| Redundancy Protocols | MRP, RSTP, PRP, HSR |
| Management | Web-based, CLI, SNMP |
| Software Features | VLAN, QoS, IGMP Snooping |
| Type | Managed Industrial Ethernet Switch |
Provides general guidelines for safe operation and handling of the device.
Defines approved application cases and adherence to technical specifications for product use.
Outlines conditions for installing the device, including fire enclosures and temperature.
Specifies the procedure for grounding the device using a separate ground connection.
Details specific regulations for operating RSPE devices in explosive gas atmospheres according to ATEX.
Specifies suitability and wiring requirements for hazardous locations, Class I, Division 2.
Describes the different power supply options and their connections based on characteristic values.
Details the types of Ethernet ports, their speeds, and capabilities like PoE.
Guidelines for installing the device on a DIN rail and proper grounding procedures.
Safety warnings and instructions for connecting electrical wires to terminal blocks.
Provides specifications for dimensions, weight, supply voltage, and current ratings.
To Next Page