Hirschmann RSP 30 User Manual

60
Installation RSP 20/25/30/35
Release 15 12/2017
8.6 Scope of delivery, order numbers and
accessories
 Scope of delivery
 Accessories
Note that products recommended as accessories may have different
characteristics to those of the device, which may limit the application
range of the overall system. For example, if you add an accessory with
IP20 to a device with IP65, the degree of protection of the overall system
is reduced to IP20.
Number Article
1× Device
1 × General safety instructions
1 × 2-pin terminal block for signal contact
1 × 3-pin terminal block for the supply voltage
(only for device variants featuring supply voltage with characteristic value K9)
2 × 3-pin terminal block for the supply voltage
(only for device variants featuring supply voltage with characteristic value KK)
2 × 2-pin terminal block for the supply voltage
(only for device variants featuring supply voltage with characteristic value CC)
2 × 2-pin terminal block for the supply voltage
(only for device variants featuring supply voltage with characteristic value TT)
Name Order number
Terminal cable 943 301-001
AutoConfiguration Adapter ACA31 942 074-001
Network management software Industrial HiVision 943 156-xxx
For device variants featuring supply voltage with characteristic
value K9 or KK:
3-pin terminal block for supply voltage (50 pieces)
943 845-008
For device variants featuring supply voltage with characteristic
value CC or TT:
2-pin terminal block for supply voltage (50 pieces)
943 845-009
2-pin terminal block for signal contact (50 pieces) 943 845-010
Power Cord 942 000-001
Protection cap for RJ45 socket (50 pieces) 943 936-001
Protection cap for SFP slot (25 pieces) 943 942-001
Gigabit Ethernet SFP transceiver Order number
M-SFP-TX/RJ45 943 977-001

Hirschmann RSP 30 Specifications

General

Brand	Hirschmann
Model	RSP 30
Category	Switch
Language	English