HIS HIS-ML23.8 A Series User Manual

Installation Instructions
10 ML23.8 User Manual, 99182A, April 2022
Connect and Set Up Touch Screen
The HIS-ML23.8 display is available with 3 di󰀨erent touch screen technologies: Single-Touch
Resistive, Multi-Touch Resistive, and Projected Capacitive (PCAP). Touch screen conguration
steps vary based on the model�
If you ordered a touch screen monitor, a USB cable is supplied for the touch screen interface�
For units with a touch screen Serial (RS-232) interface, a serial cable may be ordered separately�
Multi-Touch Resistive Touch Screen Models (HIS-ML23�8-FRVA)
Hope Industrial Multi-Touch Resistive models are pre-calibrated at the factory and do not require
recalibration in normal use�
These models do not require driver installation for most operating systems and are recognized as
touch-screen devices by recent Windows operating systems.
Using Windows, options such as hold-to-right-click are available in Windows Tablet settings.
USB Connection and Strain Relief
An integrated cable retention bracket is installed on the monitor's USB port and secures
the connection. Insert the USB cable connector through the retention bracket and into
the monitor� Connect the other end to the USB port on the host computer�
Multi-Touch PCAP Touch Screen Models (HIS-ML23�8-FPVA and HIS-ML23�8-FSVA)
Multi-Touch PCAP models are also precalibrated at the factory and do not require calibration in
normal use. These models do not require drivers for most operating systems.
Using Windows, options such as hold-to-right-click are available in Windows Tablet settings.
More advanced touch screen conguration is available using an optional driver. Contact Hope
Industrial support for more information�
USB Connection and Strain Relief
An integrated cable retention bracket is installed on the monitor's USB port and secures
the connection. Insert the USB cable connector through the retention bracket and into
the monitor� Connect the other end to the USB port on the host computer�
Single-Touch Resistive Touch Screen Models (HIS-ML23�8-FTVA)
Single-Touch Resistive models require the installation of a driver for calibration and access to

HIS HIS-ML23.8 A Series Specifications

General

Brand	HIS
Model	HIS-ML23.8 A Series
Category	Monitor
Language	English