Name: Hisense A7HAU Series
Brand: Hisense
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Follow the illustrations and textual instructions below to complete the installation steps:

Installing the Stand

Installing the Stand or Wall Mount Bracket

1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the

TV or scratching to the screen.

2. Take out the 2 stands from the accessory bag and then insert the stands into the

bottom slots of the TV.

3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.

CAUTION

Be sure to disconnect the AC power cord before removing a base stand or installing

wall mount brackets.

The display on your TV is fragile. Make sure the TV screen is not scratched or

damaged by hard objects or from pressure.

After the installation is complete, make sure the TV is steady on a table or firmly

attached to a wall mount, before removing all protective film, if any.

For

43"

Screws:

M4×16

Base Stand

Screws:

M4×16

Questions and Answers:

Need help?

Do you have a question about the Hisense A7HAU Series and is the answer not in the manual?

Hisense A7HAU Series Specifications

General