10
screen during calls.
WARNING:
Placing a heavy object on the phone or sitting on it can
damage the LCD and touch screen functions. Do not
cover the LCD proximity sensor with protective film. This
could cause the sensor to malfunction.
Installing the Card and Battery
Before you can start exploring your new phone, you'll
need to set it up.
To remove the back cover, hold the phone firmly in one
hand. With the other hand, lift off the back cover
upwards.
1. Insert the Micro-SIM card/ SD card
Insert the Micro-SIM card: Push the Micro-SIM card into
the corresponding slot. The contacts should be facing
downwards.
Insert the Micro-SD card: Push the Micro-SD card into
the corresponding slot. The contacts should be facing
downwards.
11
Notes:
1. Your phone only supports Micro-SIM card. Do not
attempt to insert other SIM type, otherwise this may
cause phone damage.
2. Please do not remove the Micro-SIM/SD card while
the card is in use; otherwise, data loss or damage may
occur. Hisense shall not be liable to any loss, including
data loss, due to misuse of a Micro-SIM/SD card.
3. Please turn off your mobile phone before replacing or
removing its Micro-SIM/SD card.
4. Micro-SD card is not included, you need to buy it
separately.
2. Insert the battery
Insert the battery into the battery compartment. The
contact plates on the battery must touch the
corresponding contact plates on the telephone.