Hisense H4 series Quick Setup Guide

8
Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be
sure to do the following things:
1. Place the TV face down on a flat, clean, safe and cushioned
surface.
2. Remove the TV stand if you already attached it.
3. Place the spacers (not included) in the corresponding bracket
holes.
CAUTION:
• When you attach the mount, be sure to use the spacers
(provided by the third-party manufacturer) between the TV
and the bracket.
• To prevent internal damage to the TV and ensure it is
mounted securely, be sure to use fixing screws (not
provided) that are 8.0 - 10.0 mm(32"/40") / 9.5 - 11.5 mm(43")
in length when measured from the attaching surface of the
mounting hook.
8.0 - 10.0 mm(32"/40")
9.5 - 11.5 mm(43")
Wall mount hole pattern (mm) 200 × 200
Wall mount screw size (mm) M6
Follow instructions provided with the Wall mount bracket.
If you have additional questions, please contact the wall-mount
manufacturer or the retailer from which you purchased the TV.
The selected screws are 8.0 - 10.0 mm(32"/40") / 9.5 - 11.5 mm
(43") in length when measured from the attaching surface of the
rear cover.
NOTE: The diameter and length of the screws differ depending
on the wall mount bracket model.
Screw
(not provided)
Bracket
(not provided)
Spacer
(not provided)
Rear cover of the TV Spacer
Screw
Wall mount bracket

Hisense H4 series Specifications

General

Display Type	LED
HDMI Ports	3
USB Ports	2
Wi-Fi	Yes
HDR Support	HDR10, HLG
Refresh Rate	60Hz
Bluetooth	No
Smart TV	Yes
Screen Sizes	43", 50", 55"