Hisense HCHM-N04X - Suspension Bolts

Unit: mm (inch)
View from above
(For Suspension Bolt)
A
(13/16)
20
(1-3/16)
30
256 (10-1/16)
For Suspension Bolt
198
(7-13/16)
(4-5/16)
110
Suspension Bracket
12 (4-1/2) x 32 (1-1/4)
Slotted Hole
4 x
Size
Model
A
HCHM-N04X 340 (13-3/8)
HCHM-N08X 580 (22-13/16)
HCHM-N12X 820 (32-5/16)
HCHM-N16X 1060 (41-3/4)
C-shaped
Clamp
Antiskid Clamp
(Bend it)
Suspension Bolt
Support Angle
Nut
Suspension
Bolt
Suspension Bolt
(M10 or W3/8)
Suspension Bolt
(M10 or W3/8)
Suspension Bolt
(M10 or W3/8)
Suspension Bolt
(M10 or W3/8)
I Beam
 For Steel Beam

For Concrete Slab
(1) Hole-In Anchor
Wooden Bar
(60 to 90mm
(2-3/8 to 3-9/16 inch) Square)
Wooden
Beam
Square
Washer
Square
Washer
Nut
Nut
 For Wooden Beam
Insert
100 to 150 kg
(220 to 331 lbs.)
Concrete
Steal
 For Reinforcing Steel
Inserting
Inserting
(with impulse rotation)
Resin Capsule
Stiffening
Agent
Glass
Stone
Epoxy Resin
(2) Resin Capsule
150 to 160mm
(5-7/8 to 6-5/16 inch)
Part APart B
Unit Body Use a hole saw
to make a hole.
Use a hole saw
to make a hole.
Fixing BoltFixing
Use a suspension bolt with 30 to 45
o
sloping edge.
Use the resin capsule within the warranty period.
Resin capsules deteriorate over time and should be used within
six mounths of the manufacturing date.
20
o
C
15
o
C
10
o
C
5
o
C
0
o
C
(68
o
F)
(59
o
F)
(50
o
F)
(41
o
F)
(32
o
F)
Min. 30min.
Min. 1hr.
Min. 2hr.
Min. 4hr.
Min. 8hr.
Ambient Temp.Time
After inserting, do not rotate or put any force until resin is hardened.
Required time is as shown in the table at right.
 Use a suspension bolt (W3/8, Metric screw thread: M10).
 Prepare washer and nut.
NOTE:
Break a head portion
of anchor by using
a hammer.
4.3 SuspensionBolts
Step 1
(1) SelectafinallocationandinstallationdirectionoftheSwitch Box.
Paycarefulattentiontothespaceforthepiping,wiringandmaintenance.
(2) Mountsuspensionbolts.
(3) Contactaqualifiedcontractororcarpenterfortheceilingtreatment.
Step 2
Mountsuspensionbolts,asshowninFigure4.3.
Figure4.3MountingofSuspensionBolts
Figure4.2PositionofSuspensionBolts
9