● Press [Menu] to open the main menu.
● Press [▲/▼] to select Lock, then press [►/OK] to enter
the Lock menu.
● Press [▲/▼] to select an option.
● Press [◄/►] to adjust the option or press [►/OK] to
enter the submenu.
● Press [Menu] to return the previous menu.
● Press [EXIT] to terminate this menu.
When you first use this function, the default password is [0000]. Once you input this password, you can continue
to the next operation.
NOTE: The factory initial password is “0000”.
■ Lock System - Press [◄/►] to turn on or turn off the Lock System effect by selecting “On” or “Off”.
■ Change Password - to set or change the password.
● First input the old password.
● Second input a new password.
● Then input the new password again.
NOTE: Please store your new password in a safe place.
■ Block Program - The MENU below will be displayed listing your available channels. Select the channel to block
and push the Green button to block it.
■ Parental Guidance
● Classifies the programs into the following:
● No Block - No programs are blocked.
● Block R and above - All "R" rated classified programs are blocked.
● Block AV and above - Adult audiences, strong violence, 15 years and older.
● Block MA and above - Mature audiences only, 15 years and older.
● Block M and above - Mature audiences only, parental guidance is strongly advised.
● Block PG and above - Parental guidance recommended.
● Block G and above - General audiences.
● Block all - All programs are blocked.
To Next Page
Loading...
Need help?
General