BEFORE USE
WAIT 5 MINUTES OR MORE BEFORE RE-STARTING
DEFROSTING
WARNING
Remove shipping packaging, tape, etc. and leave the lid open for ventilation for a while.
The unit is cleaned before shipment. However, clean the compartment interior once after delivery.
Following installation, refrigeration will start about 10 minutes after operation is started.
Operate for about 2 hours to cool the freezer compartment before placing items in the freezer.
Restarting the unit immediately after it has been turned off may cause fuses to blow and activate
the circuit-breaker, the compressor may be overloaded, and/or other damage may occur.
5
HOW TO USE
INSTRUCTION MANUAL
When 5mm of frost forms in the freezer, for maximum efficiency defrosting is required, you could shave off the
excess or defrost completely. If you defrost completely, please do as follows:
1.) Empty the contents & disconnect the power cord;
2.) Shaving the frost whilst thawing will shorten the defrost time;
3.) Then drain, wipe & clean the inside with a soft cloth.
Do not use a hammer, knife or bottle to chisel any part of the
freezer. Use a plastic scraper to prevent damaging the inside
lining and evaporater.
To Next Page