11
SERVICE MODE MENU
You can entry service mode menu by two methods:
1、[MUTE]+[5]: Press [MUTE] button, and then press number [5] button at
once.
2、[DISPLAY]+[MUTE]: Firstly, adjust the number of volume to 2. Press
[display] button, and then press [MUTE] before display on screen
disappear.
SERVICE MODE MENU include:
WHITE BAN:
adjust white balance
HW SELECT: including submenu SELECT TUNER: select tuner, STD
TERBLE: no use, FREQ SP: be used to EMI
PICTURE MODE: adjust picture mode in standard
CHANNEL+: no use
CCD语言：no use
CLEAR ROM: clear user information
SET CHANNEL: set channel for full production
NOTE: If user set password on menu and forget the password, general
purpose password, 1016, can be used to enter setting password
menu. Please don not tell user the purpose password.
To Next Page
Loading...
