CHANGE PASSWORD
Using the TV features
Using the GENERAL SETTINGS menu
1) Press the <Menu> button to enter the main menu.
2) Press the <VOL+> or <VOL-> button to select the item GENERAL SETTINGS.
3) Press the <CH+> or <CH-> button to select BLANK.
4) Press the <VOL+>or <VOL-> button to enable the BLANK
NOTE: When you enable the blank ,the screen will turn into blank screen saver mode in case of valid input signal.
The screen will turn into auto screen saver mode several seconds later, and get into stand-by mode 15
minutes later.
BLANK
Color system
1) Press the <Memu> button to enter the main menu.
2) Press the < button to select the item
GENERAL SETTINGS.
3) Press the < button to select OSD POSITION
and press <VOL+> enter it .
4) Press the < button to adjust the OSD
POSITION.
T
VOL+> or <VOL->
VOL+>or <VOL->
5) Press the <Menu> button to go back to the previous level.
he adjusted data is memorized automatically .
CH+> or <CH->
OSD POSITION
1) Press the <Menu> button to enter the main menu.
2) Press the <VOL+> or <VOL-> button to select the item GENERAL SETTINGS
3) Press the <CH+> or <CH->button to select TRANSPARENCY
4) Press the <VOL+> or <VOL->button to adjust this ITEM.
The adjusted data is memorized automatically .
TRANSPARENCY
OSD LANGUAGE
-13 -
LANGUAGE ENGLISH
GENERAL SETTINGS
OSD POSITION
COLOR SYSTEM
OSD LANGUAGE
BLANK
TRANSPARENCY
DEINTERLACER
NOISE REDUCE
MADI
FILM MODE
LADI
1) Press the <Menu> button to enter the main menu.
2) Press the < button to select the item .
3) Press the < button to select COLOUR SYSTEM.
4) Press the < button to switch among PAL , SECAM.
Suggestion: Please refer to the system of your country to set the COLOUR SYSTEM before you take AUTO SEARCH
or MANUAL SEARCH.
VOL+> or <VOL-> GENERAL SETTINGS
VOL+> or <VOL->
CH+> or <CH->
1) Press the <Menu> button to enter the main menu.
2) Press the < button to select the item .
3) Press the < button to select OSD LANGUAGE.
4) Press the < button to select language.
VOL+> or <VOL-> GENERAL SETTINGS
VOL+> or <VOL->
5) Press the <Menu> button to go back to the previous level.
Several kinds of Language can be selected:
English ,French ,German ,Italian ,Spanish ,Greek,Dutch,Portuguese.
CH+> or <CH->
DEINTERLACER
1) Press the <Memu> button to enter the main menu.
2) Press the < button to select the item GENERAL SETTINGS.
3) Press the < button to select DEINTERLACER and press <VOL+> enter it .
4) Press the <CH+> or button to select the item you want to adjust..
5) Press the <VOL+> or <VOL-> button to make the item on or off .
6
VOL+> or <VOL->
<CH->
) Press the <Menu> button to go back to the previous level.
CH+> or <CH->
To Next Page
Loading...
Need help?
General
