Installing your new appliance
The water connection must be
made by a qualified plumber.
Operation outside the water
pressure range may cause
malfunction, severe and
damaging water leaks.
Under normal conditions, a
200cc (5.75 oz.) cup can be filled
in about 10 seconds.
If the refrigerator is installed in an
area with low water pressure
(below 30psi), you can install a
booster pump to compensate for
the low pressure.
If you turn the refrigerator on
before the water is connected,
turn off the ice maker.
Warning
4. You need to purchase several item to
complete this connection. You may find
these items sold as a kit at local
hardware store.
2 clips
1/4'' extension
tubing
1 Coupler
1. First,shut off the main water supply.
Connecting to the water supply
line
1. Power drill and 1/4 drill bit."
2. 1/2 or adjustable wrench."
3. Flatblade and Philips-head
screwdrivers.
Saddle type shut off valve (1/4" outlet)-
one 1/4''
compression nut
1 ferrule
( )sleeve
What you need to have before you
start
2. Using the power drill and a 1/4āā drill bit
drill into the cold-water line and
connect the saddle-type shutoff valve.
Cold water line
Pipe clamp
Shut off valve
11
To Next Page
Loading...
