Hisense WF3M841BWI - Page 28

27
Delay
Set the Delay function:
1. Select a programme
2.Press the Delay button to choose the time(the delaying time is 0-24 h.)
3.Press [Start/Pause ] to commence the delay operation
Choose the Programme
Start
On/Off
Setting time
Delay
Cancel the Delay function:
Press the [Delay ] button until the display be 0h.It should be pressed before
starting the programme. If the programme already started, should press the
[On/Off ] button to reset the programme.
Pre Wash
The Prewash function can get an extra wash before main wash.
Pre
Wash
Extra Rinse
The laundry will undergo extra rinse once after you select it.
Extra
Rinse
Spin
Press the button to change the spin speed.
Spin
Temp .
When needed, the washing temperature can be adjusted by pressing the
temperature button in the following
steps: Cold - 20°C - 30°C - 40°C - 60°C - 90°C.
My Cycle
Memory the frequently used programmes
Press [ ] 3sec. to memory the running programme. The default is
Cotton.
Temp.
Delay