To Next PageTo Next PageWhat to do if my Hisense WFDJ60101 Washer shows F01?
If your Hisense washer displays “F01” on the screen, it means the machine isn't getting enough water. Make sure the faucet is fully open and has sufficient water pressure. Also, check if the water inlet pipe is kinked or if the filter net of the water inlet pipe is blocked. Finally, ensure the water pipe isn't frozen.
Why is my Hisense WFDJ60101 not spinning properly?
If the final spin results of your Hisense washer are poor, and the laundry is still too wet, try removing some items and repeating the spin cycle. Excessive foam can also prevent proper spinning, so use the correct amount of detergent. Also, check that the spin speed selector is not set to “0”.
How to fix a Hisense WFDJ60101 Washer that won't start?
If your Hisense washer isn't starting, verify that the mains plug is properly inserted into the socket and that the wall socket is functioning correctly by testing it with another appliance. Ensure the door is fully closed and that you've pressed the “Start/Pause” button.
Why is my Hisense WFDJ60101 vibrating so much?
If your Hisense washer vibrates excessively during the spin cycle, make sure the washing machine is level and standing firmly on all four feet. Also, it's essential to ensure that the transportation bolts have been removed before using the machine.
What does F03 mean on my Hisense WFDJ60101 Washer?
If your Hisense washer displays “F03” on the screen, it indicates that the washer is not emptying. Inspect the drain pipe to ensure it is not knotted. Also, check the filter in the drain pump to see if it is blocked.
What to do if my Hisense WFDJ60101 Washer stops mid cycle?
If your Hisense washer stops during a program, first press the “Start/Pause” button to initiate the drain process. If the door was opened, close it and press “Start/Pause” again. Also, if there's too much foam, the machine will enter a foam-killing routine and restart automatically after a while.
Why does my Hisense Washer have detergent residue after washing?
If you find detergent and additives residue in the detergent drawer of your Hisense washer after washing, check that the cover grid of the softener chamber and the separator of the main wash chamber are correctly installed and clean. Ensure sufficient water is entering; the mesh filters of the water supply may be blocked. Also, verify the separator's position in the main wash chamber is correct for the type of detergent used (powder or liquid).
General| Loading Type | Front Load |
|---|---|
| Washing Capacity | 6 kg |
| Spin Speed | 1000 rpm |
| Energy Rating | A+++ |
| Noise Level (Wash/Spin) | 76 dB |
Details on paper type, printing method, and color requirements for the manual.
Ensures accuracy, clarity, and absence of defects in printed content.
Defines paper size, tolerances, and general dimension standards for the product.
Outlines requirements for development confirmation, REACH, and RoHS compliance.
Manufacturer's rights, manual reading, electrical safety, and general appliance use guidelines.
Guidelines for use by children and individuals with reduced capabilities, emphasizing supervision.
Instructions for handling damaged cords and using correct hose sets for safety.
Specifies suitable installation areas, ventilation, and capacity limits for domestic use.
Guidance on recycling packaging and safely disposing of used washing machines according to regulations.
Recommendations for appliance placement, avoiding flammable fluids, and electrical safety during operation.
Details on cleaning, door usage, and limitations for specific user groups or garment types.
Visual identification of the washing machine's main parts like the door, control panel, and hoses.
Lists all items included with the washing machine, such as manuals, hoses, and tools.
Explains the function of each button and indicator on the washing machine's control panel.
Provides minimum dimensions and guidelines for selecting a suitable, stable, and safe installation site.
Steps for safely removing packaging and checking the appliance for any damage or missing parts.
Step-by-step instructions with illustrations for removing safety bolts used during transport.
Guide on how to adjust the machine's feet to ensure stability and prevent vibration.
Detailed instructions on how to connect the inlet hoses to the water tap, including pressure and connector types.
Instructions for properly connecting the drain hose to a siphon or sink, including length and kink prevention.
Specifies electrical supply needs, socket requirements, and safety regulations for connection.
Steps to prepare the machine and run a short cycle to remove residual water from testing.
Guidance on sorting clothes by fabric type, care labels, and color for optimal washing.
Instructions on emptying pockets, securing fasteners, pre-treating stains, and loading clothes correctly.
Advice on choosing detergents, dosage, and using additives like softeners or stain removers.
Explains the detergent drawer compartments and how to position the separator for powder or liquid detergent.
Important notes on storing detergents, using liquid detergents, and handling special additives like starch.
A comprehensive table detailing available wash programs, their settings, and load capacities.
Detailed explanations for each wash program, including recommended uses and specific garment types.
Steps to power on, select a program, and add detergent according to the chosen cycle.
How to choose additional functions like Prewash, Extra Rinse, Spin speed, and Temperature.
Instructions on initiating a program, pausing, and reloading clothes during the cycle.
How to cancel, reselect options, and what happens when a program finishes.
Explains the meaning and function of Door Lock, Tap, and Draining Pump icons.
Explains how to activate and use features like Child Lock, Delay End, and Mute Function.
Detailed steps for safely accessing, cleaning, and refitting the appliance's filter.
Procedure for safely draining any remaining water from the machine before maintenance.
Guidelines for cleaning the exterior, control panel, and detergent dispenser.
Checks and steps to resolve problems where the washing machine fails to power on or start.
Troubleshooting steps for when the appliance stops during a wash cycle or exhibits excessive vibration.
Solutions for poor spin results and residue left in the detergent drawer after washing.
Specific troubleshooting for issues related to connecting or filling with hot and cold water.
A table listing error codes and initial checks for common faults like water inflow or drainage.
Detailed diagnosis and resolution for specific error codes related to water intake and drainage.
Explains fault codes for door lock, electronic module, unbalance, and procedures for contacting support.
Details on model numbers, capacity, dimensions, weight, and electrical requirements.
Information on energy efficiency class, consumption rates, and water usage for various programs.
Data on wash duration, programme times, and remaining moisture content for standard cycles.
