Need help?Do you have a question about the Hisense WFMC6010 and is the answer not in the manual?
Details the key features like Ultra Capacity, Built-in Heater, and Child Lock.
Explains the fuzzy logic system for optimizing wash time and water level based on conditions.
Describes PCB states (Off, Ready, End) and operations after power is applied or knob is turned.
Details the FWL sensor's role in controlling water inflow and stopping at set levels during wash and drain.
Explains PCB logic for door lock/unlock based on program status, user input, and safety conditions.
Describes the drum rotation control and motor speed for the laundering process, including a sample program chart.
Explains how the PCB manages the heater to reach and maintain the user-set water temperature.
Details the spinning process, including drum rotation, distribution measurement, speed limits, and error indications.
Covers removing shipping bolts, ensuring appliance stability on a flat surface, and adjusting leveling feet.
Instructs to verify the rubber washer and securely tighten the inlet hose to prevent leaks.
Emphasizes proper drain hose placement, avoiding twists, submersion, and ensuring it's less than 49" from the floor.
Guides connecting the power plug to a wall outlet and warns against connecting multiple devices to avoid fire hazards.
Outlines the steps for performing a test run after installation to verify functionality and operation.
Illustrates and describes the control panels for MC (RC) and VC (HC) models, including program selection.
Explains how to select available wash programs, additional functions, and option settings for optimal laundry results.
Details functions like Delay Function (setting start time) and Child Lock (preventing unintended operation).
Describes the Prewash function, highlighting its benefit for enhancing washing effects and removing stubborn stains.
Presents the main controller PCBA wiring diagram, illustrating connections between components and the PCB.
Provides a chart showing temperature ranges and default temperatures for each washing program.
Guides users on entering and performing the self-inspection mode, detailing the sequence of operations and error codes.
Explains how to activate and utilize the special function mode for diagnostics and parameter adjustment.
Emphasizes safety precautions, especially concerning electric shock and static discharge when handling internal parts.
Provides a summary of error codes, their symptoms, and common causes for troubleshooting appliance issues.
Offers detailed troubleshooting flowcharts for specific errors like water inlet, drain, overflow, door lock, and motor issues.
Details the circuit diagram, test points, and expected resistance values for testing the noise filter.
Explains the door lock mechanism's function and provides test points with resistance and voltage readings for diagnosis.
Describes the motor's function and lists test points with resistance values for various stator and rotor windings.
Details the pump's function (draining, circulation) and provides test points with resistance values for checking its coil.
Explains the PCB's role in powering valves and provides test points with resistance values for pre-valve and main valve.
Describes the wash heater's purpose and provides test points with resistance values for checking its functionality.
Provides step-by-step instructions for disassembling the control panel assembly, including screw removal and connector disconnection.
Details the disassembly procedure for the dispenser assembly, covering panel removal, drawer pull-out, and harness disconnection.
Explains how to disassemble the filter, including screw removal and disconnecting the filter connector from the main harness.
Provides instructions for disassembling the door assembly, including retainer-bellow removal and door lock connector disconnection.
Details the steps for removing the front panel, involving opening the pump door cover and unscrewing panels.
Explains how to disassemble the pump, including unscrewing it and disconnecting the hose clamp.
Provides instructions for disassembling the heater, covering rear panel removal, connector disconnection, and screw removal.
Details the motor disassembly process, including belt, pulley, and damper pin removal, and checking claw structure.
To Next Page
General