Hisense WFMC6010 - Installation and Test; Standard Installation

5. INSTALLATION AND TEST
11
1. Before servi
cing, ask the
customer what the trouble is.
2. Check the setup (power suppl
y is 220-240V
AC, remove the transit bolts,
level the washer
....).
3. Check with the troubleshooting guide.
4. Plan your servi
ce method by referring to the disassem
bly instructions.
5. Service the unit.
6. After
servicing, operate the appliance to see whether it functions correctly.
5.1 STANDARD INSTALLATION
REMOVE THE
SHIPPING BOLTS
INSTALL THE APPLIANCE
ON A FLAT AND FIRM
ADJUST THE LEVELING
♦ Remove the 4 shipping bolts with
the supplied wrench.
※Do first lo
wer side to remove
easily.
♦ Keep the shipping bolts and
spanner for future use.
♦ Insert the 4 caps (provided) into the
hole.
♦
Turn the leveling feet to adjust the
appliance.
♦Turn clockwise to raise;
♦Turn counterclockwise to lower.