3. FEATURES & TECHNICAL EXPLANATION
6
3.2 INTELLIGENT FUZZY CONTROL
In order to achieve the best washing effects, it is necessary to determine the
optimum time and washing water level based on the water supply conditions.
3.3 POWER SUPPLY CONTROL
After the washing machine is energized, the PCB is under “Off mode”, and all
buttons and knobs except for the “Off” position of the knob are disabled; all loads
are in the state of ready-for-activating.
After turning the knob into “Off” position, the PCB will switch to “Ready mode”
from “Off mode”, and conduct status inquiry for minutes, with values of
parameters like water level, water temperature, air temperature, motor speed,
door lock state, etc.
When the PCB runs a complete routine to end, “END” will flashed on LED. It
will not stop until the knob is turned to “Off” position manually.
When the program finishes and displays “End”, the door will be unlocked, and
the PCB will enter in “End mode”.
• washing program
• Water supply
Sensing
• Intelligence
fuzzy
Handling
• washing time
• water level
Adjust
To Next Page
Loading...
