6.OPERATION
17
6.3 COMMON FUNCTIONS
Delay Function
This function will allow to select the time your wash program will start.
♦
Select Delay after you have sel
ected the program an
d other options.
♦ Press the “T
emp. + Spin” button once and the delay time will increase by 3 hours. The delay time
can be
programmed for between 3hours to 12 hours.
To cancel the selection release the button and then press them
again.
♦The delay time must be longer than the wash program length as the delay time
is the time the program will finish.
For exam
ple: if the selected program time is 02:28, the delay time selected must be between 03:00 and 12:00.
♦After the delay time has been selected press the “Start /Pause” button and the display w
ill start to count down.
When the delay tim
e is down to the program length time, the Delay icon will go out and the program will start.
♦ To cancel the delay time, after the “Start /Pause” button has been pressed, but before
the program has started,
it will be necessary to turn the washing machine of
f.
Child lock
To Next Page
Loading...
