Need help?Do you have a question about the Hitachi 650 Series and is the answer not in the manual?
General| Brand | Hitachi |
|---|---|
| Model | 650 Series |
| Category | Control Systems |
| Language | English |
Provides instructions on operating the IED after commissioning, monitoring, controlling, setting, and fault determination.
Addresses the operator trained in protection equipment operation.
Details the set of manuals available for the IED throughout its lifecycle.
Lists various manuals for IED lifecycle stages and their intended use.
Details changes made to the document across different product revisions.
Lists document numbers for manuals related to REB650, REC650, RED650, REL650 series.
Explains warning symbols, formatting for navigation, messages, parameters, and conventions.
Explains warning symbols like electrical shock, personal injury, hot surface, and laser product.
Explains abbreviations, formatting for navigation, messages, parameters, and symbols.
Describes warnings observed on the product, including electrical and laser hazards.
Lists essential safety warnings for personnel involved in installation and operation.
Details caution signs related to inadvertent tripping, ESD, PCB handling, and live wires.
Explains note signs for critical information like setting group changes and current transformer limits.
Discusses sustainability considerations in product design, manufacturing, and lifecycle.
Provides guidance on recycling and proper disposal of IED components.
Introduces the Local Human-Machine Interface (LHMI) and its components.
Describes the LHMI display layout, including path, content, status, and scroll bar areas.
Details the status (Ready, Start, Trip) and programmable indication LEDs on the LHMI.
Explains the function of LHMI keypad buttons for navigation, control, and programming.
Explains how to control IED objects using Open/Close buttons.
Details the use of arrow buttons for menu navigation and scrolling.
Lists command push-buttons like Menu, R/L, Clear, Help, and Multipage.
Explains the role of function buttons for executing defined functions or menu shortcuts.
Details the various functions available through the local HMI.
Describes the Ready, Start, and Trip LEDs indicating device status and operation.
Explains how protection indicators (Ready, Start, Trip) and alarm LEDs function.
Explains the use of 15 programmable three-color LEDs for alarm indication.
Describes how to read and write parameters via LHMI.
Explains the RJ-45 port for front communication and its indicator LEDs.
Shows an example of the single-line diagram display.
Explains user roles, rights, and default users for IED access.
Details supported communication protocols like IEC 61850, DNP3, LON, and SPA.
Introduces PCM600 for IED management throughout its lifecycle.
Explains connectivity packages for IED communication and configuration.
General guide on using the IED's local Human-Machine Interface.
Explains the on-screen keyboard layout and input method.
Step-by-step guide for user login procedure on the LHMI.
Describes automatic and manual logout procedures from the LHMI.
How to turn on/off the LHMI display backlight and set timeout.
How to switch between local and remote control modes using the R/L button.
How to access device information like revision and serial number.
How to adjust display contrast using LHMI buttons or parameter settings.
Steps to change the LHMI language setting.
General guidance on navigating through the LHMI menus using the keypad.
Overview of the main menu groups and submenus.
How to scroll through content when it exceeds the display area.
How to set the default view for the LHMI display.
How to use configurable function buttons for shortcuts or control actions.
How to view and interact with the single-line diagram created in PCM600.
Steps to navigate and view setting values within different setting groups.
General information on editing parameter values with appropriate user rights.
How to edit numerical parameter values on the LHMI.
Guide to editing string parameter values using the on-screen keyboard.
How to edit enumerated parameter values.
How to change the system time via LHMI.
Process for saving parameter changes to non-volatile memory.
How to use the Clear button to reset indications, alarms, and registers.
How to access and use the LHMI help function.
Basic operation includes monitoring, checking states, parameters, events, and alarms.
How to identify disturbances using Ready, Start, and Trip LEDs.
How disturbance recordings are triggered manually or automatically.
How to analyze disturbance data collected by the IED.
How PCM600 is used to create disturbance recorder data reports.
How the IED handles internal faults and indicates them.
Explains conditions under which protection and control functions can be non-operative.
How to set IED parameters via LHMI or PCM600.
How to edit individual setting values for IED functions.
How to define settings for various conditions using setting groups.
Overview of how to monitor the IED's operation.
Describes the three types of indications: LEDs, programmable LEDs, and auto-indicating messages.
How to read and manage auto-indication messages displayed upon disturbance recording.
How to monitor active alarms indicated by LEDs and the Multipage button.
How to check for internal IED faults using LHMI menus.
How to access momentary and demand values.
Data collected by the IED for post-fault analysis, including disturbance records and events.
How to trigger disturbance recordings manually or automatically.
How to read individual disturbance recordings.
How to control and read disturbance recorder data with PCM600.
How to view and manage events logged by the IED.
Overview of remote monitoring capabilities using PCM600.
Using PCM600 for remote IED operations.
Procedures for controlling IED functions and equipment.
How to operate circuit breakers and disconnectors from LHMI in local mode.
Procedures for resetting the IED, including clearing alarms and indications.
Using the Clear button to reset indications, alarms, and registers.
How to modify IED settings and functionality.
How to define setting groups for different operational conditions.
Steps to activate a specific setting group via LHMI.
How to browse and edit parameter values within setting groups.
How to configure and activate LEDs for alarm indication using PCM600.
General approach to troubleshooting IED issues.
Steps to identify and diagnose hardware-related errors.
Steps to identify and resolve runtime errors within the IED.
How to check for and identify blocked functions.
How to diagnose communication link failures.
Verifying the status of communication ports and links.
How to check if time synchronization is active and correct.
How to perform a display test on the LHMI.
Using the LHMI hint menu for troubleshooting IED status.
Information on various indication messages and their meanings.
How internal faults are indicated and where to find messages.
How warning messages are displayed and where to find them.
Lists additional indication messages that do not signify faults or warnings.
Procedures for correcting issues like user management.
How to manage user accounts and passwords.
Steps to change the active user's password via LHMI.
Navigating menus to identify application-level issues.
Physical inspection of wiring for connection and polarity issues.
License details for CyoEncode software.
License details for CyoEncode software.
License terms for Cyrus SASL software.
License terms for Cyrus SASL software.
License for MD5 implementation.
License for MD5 implementation.
License for GNU Libtool.
License for GNU Libtool.
Creative Commons Zero license terms.
Creative Commons Zero license terms.
CMU License for Net-SNMP.
CMU License for Net-SNMP.
MIT License for libexpat and Net-SNMP.
MIT License for libexpat and Net-SNMP.
BSD License for Net-SNMP.
BSD License for Net-SNMP.
OpenLDAP Public License terms.
OpenLDAP Public License terms.
OpenSSL License details.
OpenSSL License details.
Berkeley Public License for vfprintf.c.
Berkeley Public License for vfprintf.c.
To Next Page
