To Next PageTo Next Page
Need help?Do you have a question about the Hitachi NT 65MA3 and is the answer not in the manual?
General| Magazine Capacity | 100 Nails |
|---|---|
| Operating Pressure | 70-120 psi |
| Weight | 4.2 lbs |
| Fastener Type | Nails |
| Fastener Length | 1-1/4" to 2-1/2" |
| Length | 320 mm |
Defines DANGER, WARNING, CAUTION, and NOTE terms used in the manual for hazard communication.
Describes the three nailing action mechanisms: Single, Contact, and Full Sequential actuation.
Covers wearing safety glasses, proper tool handling, and avoiding common hazards during operation.
Includes checks for push lever, screws, nail loading, and keeping clear of the firing head.
Addresses flammable substances, visitor safety, dress code, and coupler type warnings.
Covers workpiece placement, switching device checks, double fire prevention, and live wire detection.
Identifies and illustrates the various components of the Hitachi NT65MA3 nailer for user reference.
Specifies the need for clean, dry, regulated compressed air and appropriate compressor specifications.
Explains the function and importance of FRL units for optimal nailer performance and longevity.
Details air hose requirements and how to calculate air consumption for proper compressor sizing.
Explains the different operating mechanisms: Single, Contact, and Full Sequential actuation modes.
Details intermittent (trigger fire) and continuous (push lever fire) operation methods for driving nails.
Step-by-step guide on how to safely remove jammed nails from the nailer mechanism.
Procedures for cleaning and maintaining the nail magazine to prevent feeding issues.
Guidelines for proper storage to prevent rust and damage when not in use.
Lists common nailer problems and provides solutions for quick resolution.
A table outlining regular maintenance actions, their purpose, and how to perform them for optimal tool life.
