To Next PageTo Next Page
Need help?Do you have a question about the Hitachi NT 65M2 (S) and is the answer not in the manual?
Explains the meaning of signal words like DANGER, WARNING, CAUTION, and NOTE.
Describes the two mechanisms for driving nails: Single Sequential Actuation and Contact Actuation.
Provides essential safety instructions for operating the nailer.
Highlights critical hazards that can lead to death or serious injury.
Alerts users to potentially hazardous situations that could result in death or serious injury.
Lists further warnings regarding nailer operation and handling.
Outlines the responsibilities of employers regarding nailer safety and usage.
Identifies and illustrates the various parts of the nailer.
Explains the two nailer operation modes: Single Sequential and Contact Actuation.
Specifies the correct type and dimensions of nails to be used with the nailer.
Lists standard and optional accessories available for the nailer.
Describes common applications and uses for the nailer.
Lists essential checks to perform before operating the nailer.
Specifies the required working environment conditions for safe operation.
Warns against using oxygen or bottled gases due to explosion risk.
Warns about exceeding pressure limits and using non-relieving couplers.
Details the requirements for the compressed air power source.
Explains the importance and function of the filter-regulator-lubricator unit.
Specifies the required working pressure rating for the air hose.
Provides a table and formula for calculating air consumption and compressor size.
Emphasizes the importance of lubrication and specifies lubricant types.
Warns against free-firing the nailer at high pressure in cold weather.
Outlines the procedure for testing the nailer's functionality before use.
Mandates safety glasses and proper operation during nailer testing.
Checks for smooth movement of the push lever and trigger.
Verifies that the nailer does not have air leaks.
Confirms the nailer does not operate unintentionally.
Confirms the nailer operates correctly when trigger is pulled.
Verifies the nailer operates correctly with nails loaded.
Warns against exceeding the maximum recommended air pressure.
Lists safety precautions to follow when loading nails.
Advises using at least 5 nails remaining for proper feeding.
Introduces the nailer operation section.
Re-emphasizes the need for safety glasses during nailer operation.
Lists critical safety warnings for nailer operation.
Explains the two main nailing operation mechanisms.
Details the Single Sequential Actuation mechanism.
Describes intermittent operation using the trigger.
Describes continuous operation using the push lever.
Warns about double firing or accidental firing due to recoil.
Provides step-by-step instructions for intermittent operation.
Provides step-by-step instructions for continuous operation.
Warns about keeping fingers off the trigger and body away from discharge area.
Recommends Single Sequential Actuation for precision and safety.
Advises removing finger from trigger and disconnecting air hose when adjusting.
Explains conditions for consistent nail depth.
Details the procedure for adjusting nail depth.
Lists safety warnings for using the blow nozzle.
Provides notes on potential temporary degradation of nailing force and oil spillage.
Advises disconnecting air hose before changing exhaust direction.
Advises disconnecting air hose before attaching/detaching the nose cap.
Notes that the nose cap may affect nailing depth, requiring re-adjustment.
Stresses disconnecting air hose and removing nails before maintenance.
Details the procedure for clearing a jammed nail.
Explains how to inspect and clean the magazine.
Provides instructions for storing the nailer properly.
Advises changing missing or damaged warning labels.
States that repairs must be done by authorized service centers.
Notes that product designs and parts may be modified.
States that only trained personnel should perform repairs and use recommended parts.
Provides a chart detailing maintenance actions, reasons, and how-to steps.
Introduces a table for resolving common nailer problems.
Advises contacting a service center if problems continue.
General
