Hitachi NT 50AE2 (S) User Manual

Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
Model Brad Nailer
Modèle Cloueur pour Brads
Modelo Clavadora para Brads
NT 50AE2 (S) • NT 32AE2 (S)
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la mort
ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance du manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o en la
muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
000BookNT50AE2US.indb1000BookNT50AE2US.indb1 2015/06/2216:54:272015/06/2216:54:27

Hitachi NT 50AE2 (S) Specifications

General

Magazine Capacity	100 nails
Operating Pressure	70-120 PSI
Fastener Type	Brad Nails
Power Source	Pneumatic
Nail Size	50 mm
Nail Gauge	18 Gauge
Air Inlet	1/4" NPT

Summary

Important Safety Information

Definitions of Signal Words

Explains the meaning of signal words like DANGER, WARNING, and CAUTION used in the manual.

Safety Instructions

Important Safety Instructions

Essential warnings and precautions for operating and maintaining the nailer safely.

Work Area and Personal Safety

Employer's Responsibilities

Employer Responsibilities Overview

Specifications and Nail Selection

Specifications Overview

Nail Selection Guide

Nailer Operation Details

Adjusting Air Pressure

Details on how to set and adjust the nailer's operating air pressure.

Loading Nails

Methods of Operation

Explains the two primary methods: Single Sequential and Contact Actuation.

Adjusting Nailing Depth

Guide on how to adjust the nailer's depth setting for proper nail penetration.

Maintenance and Repairs

Maintenance and Inspection Procedures

Service Parts List and Chart

Operator Troubleshooting

Operator Troubleshooting Guide

A table to help resolve common problems encountered during nailer operation.