Hitachi C 10FSB

*
ALTERNATIVE PARTS --- 5 ---
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
PARTS
2 -- 04
C 10FSH
52 321-340 SPRING (D) 1
53 321-345 FENCE (A) 1
* 54A 322-197 BASE ASS’Y 1 INCLUD. 24, 25, 55, 56
* 54A 321-372 BASE ASS’Y 1 INCLUD. 24, 25, 55, 56 FOR USA, CAN
55 312-672 BASE RUBBER 4
56 315-210 SCALE (A) 1
* 57 949-616 BOLT M6X25 (10 PCS.) 1 EXCEPT FOR USA, CAN, AUS, NZL
* 58 987-860
SEAL LOCK HEX. SOCKET SET SCREW M6X6 2 EXCEPT FOR USA, CAN, AUS, NZL
* 59 321-552 PIN 2 EXCEPT FOR USA, CAN, AUS, NZL
60 CAUTION LABEL (Q) 1 EXCEPT FOR USA, CAN, AUS, NZL
61 322-617 SUB FENCE (A) ASS’Y1
INCLUD. 57-60 EXCEPT FOR USA, AUS, NZL
71 996-227 PACKING COVER 2
72 949-429 BOLT WASHER M4 (10 PCS.) 11
73 949-215 MACHINE SCREW M4X8 (10 PCS.) 6
74 321-349 COVER 1
* 75 322-624 HINGE (A) ASS’Y 1 INCLUD. 105
* 75 322-382 HINGE (A) ASS’Y 1 INCLUD. 105 FOR AUS, NZL
* 75 321-351 HINGE (A) ASS’Y 1 INCLUD. 105 FOR USA, CAN
76 996-276 SLEEVE 1
77 321-332 SPRING 1
78 961-554 HEX. SOCKET SET SCREW M8X10 1
79 302-518 STOPPER PIN ASS’Y 1 INCLUD. 80
80 984-528 O-RING (P-6) 1
81 319-270 ADJUSTER 1
82 949-312 WING NUT M8 (10 PCS.) 1
83 949-633 BOLT M8X50 (10 PCS.) 1
84 320-141 HINGE SHAFT (A) 1
85 312-672 BASE RUBBER 1
86 949-237 MACHINE SCREW M5X12 (10 PCS.) 1
87 949-454 SPRING WASHER M5 (10 PCS.) 1
88 998-980 SPACER 1
* 89 322-199 LINK 1
* 89 321-368 LINK 1 FOR USA, CAN
90 319-268 PLATE (B) 1
91 319-267 SPRING 1
92 305-179 CLUTCH SPRING 2
93 980-523 NYLON CLIP 1
94 319-267 SPRING 2
95 319-541
SEAL LOCK HEX. SOCKET SET SCREW M5X6 2
96 305-180 CLUTCH SCREW 1
97 962-614 ADJUSTING WASHER (B) T0.5 1
98 319-269 HOLDER (B) 1
* 99 322-618 LASER MARKER 1
* 99 321-348 LASER MARKER 1 FOR USA, CAN, AUS, NZL
100 319-271 COVER (A) 1
101 319-272 PLATE (A) 1
102 949-217 MACHINE SCREW M4X12 (10 PCS.) 5
103 CAUTION LABEL (J) 1
* 104 966-803 NYLON CLIP 1
* 104 948-614 NYLON CLIP 1 FOR AUS, NZL
* 104 948-193 NYLON CLIP 1 FOR USA, CAN