Hitachi C 10FSB

*
ALTERNATIVE PARTS --- 5 ---
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
PARTS
2 -- 04
C 10FSB
52 321-345 FENCE (A) 1
* 53A 322-197 BASE ASS’Y 1 INCLUD. 24, 25, 54, 55
* 53A 321-372 BASE ASS’Y 1 INCLUD. 24, 25, 54, 55 FOR USA, CAN
54 312-672 BASE RUBBER 4
55 315-210 SCALE (A) 1
* 56 949-616 BOLT M6X25 (10 PCS.) 1 EXCEPT FOR USA, CAN, AUS, NZL
* 57 987-860
SEAL LOCK HEX. SOCKET SET SCREW M6X6 2 EXCEPT FOR USA, CAN, AUS, NZL
* 58 321-552 PIN 2 EXCEPT FOR USA, CAN, AUS, NZL
59 CAUTON LABEL (Q) 1 EXCEPT FOR USA, CAN, AUS, NZL
* 60 322-617 SUB FENCE (A) ASS’Y1
INCLUD. 56-59 EXCEPT FOR USA, CAN, AUS, NZL
71 996-227 PACKING COVER 2
72 949-429 BOLT WASHER M4 (10 PCS.) 5
73 949-215 MACHINE SCREW M4X8 (10 PCS.) 4
* 74 322-198 HINGE (B) ASS’Y 1 INCLUD. 89 FOR AUS, NZL
* 74 322-653 HINGE (B) ASS’Y 1 INCLUD. 89
* 74 321-391 HINGE (B) ASS’Y 1 INCLUD. 89 FOR USA, CAN
75 996-276 SLEEVE 1
76 321-332 SPRING 1
77 961-554 HEX. SOCKET SET SCREW M8X10 1
78 302-518 STOPPER PIN ASS’Y 1 INCLUD. 79
79 984-528 O-RING (P-6) 1
80 949-312 WING NUT M8 (10 PCS.) 1
81 949-633 BOLT M8X50 (10 PCS.) 1
82 320-141 HINGE SHAFT (A) 1
83 949-237 MACHINE SCREW M5X12 (10 PCS.) 1
84 949-454 SPRING WASHER M5 (10 PCS.) 1
85 998-980 SPACER 1
* 86 322-199 LINK 1
* 86 321-368 LINK 1 FOR USA, CAN
87 949-217 MACHINE SCREW M4X12 (10 PCS.) 1
* 88 948-614 NYLON CLIP 1 FOR AUS, NZL
* 88 966-803 NYLON CLIP 1
* 88 948-193 NYLON CLIP 1 FOR USA, CAN
* 89 322-619 SUPPORT 1
* 89 321-352 SUPPORT 1 FOR USA, CAN, AUS, NZL
90 321-347 BALL BUSHING 1
91 996-226 FELT 2
92 996-223 BUSHING 2
93 949-568 LOCK NUT M8 (10 PCS.) 2
94 974-500 HEX. SOCKET SET SCREW M8X16 2
95 302-459 WING BOLT M6X17 1
96 947-859 LOCK SPRING 1
97 963-174 CLAMP PIECE (B) 1
98 320-206 CAUTION LABEL (A) 1
99 321-375 HOLDER (A) 1
100 949-686 ROLL PIN D6X40 (10 PCS.) 2
101 321-329 INDICATOR 2
102 303-409 NYLOCK BOLT M8X25 1
103 307-956
SEAL LOCK HEX. SOCKET SET SCREW M6X10 2
* 104 302-503 KNOB BOLT M6X22 1 FOR USA, CAN, AUS, NZL
105 321-333 GUARD (A) 1