Hitachi C 8FSE - Page 57

PART
S
C 8FSHE
DESCRIPTION REMARKS
* 50 SUB FENCE 1 FOR USA, CAN
51 949-342 FLAT HD. SCREW M6X25 (10 PCS.) 1
52 998-844 HOLDER 1
53 949-610 BOLT M6X10 (10 PCS.) 1
54 324-400 LINER 3
55 329-419 FENCE (A) 1
56 329-414 BASE ASS'Y 1 INCLUD. 53, 57, 58
57 323-606 BASE RUBBER 4
58 315-210 SCALE (A) 1
* 59 CAUTION LABEL (A) 1
* 59 CAUTION LABEL (B) 1 FOR CHN
81 949-215 MACHINE SCREW M4X8 (10 PCS.) 2
82 949-429 BOLT WASHER M4 (10 PCS.) 6
83 329-491 COVER 1
84 322-889 SLEEVE 1
85 329-410 SPRING 1
86 961-554 HEX. SOCKET SET SCREW M8X10 4
87 329-427 HINGE (A) ASS'Y 1 INCLUD. 86, 113
88 319-270 ADJUSTER 1
89 949-237 MACHINE SCREW M5X12 (10 PCS.) 1
90 998-980 SPACER 1
91 329-411 LINK 1
92 320-141 HINGE SHAFT (A) 1
93 323-606 BASE RUBBER 1
94 984-528 O-RING (P-6) 1
95 302-518 STOPPER PIN ASS'Y 1 INCLUD. 94
96 305-180 CLUTCH SCREW 1
97 305-179 CLUTCH SPRING 1
98 962-614 ADJUSTING WASHER (B) T0.5 1
99 319-268 PLATE (B) 1
100 319-267 SPRING 1
101 305-179 CLUTCH SPRING 1
102 319-267 SPRING 2
103 319-541
SEAL LOCK HEX. SOCKET SET SCREW M5X6 2
104 319-271 COVER (A) 1
105 322-291 PLATE (A) 1
106 319-269 HOLDER (B) 1
107 329-863 LASER MARKER 1
108 949-215 MACHINE SCREW M4X8 (10 PCS.) 3
109 CAUTION LABEL (J) 1
* 110 500-234Z CORD 1 (CORD ARMOR D10.1)
* 110 500-247Z CORD 1
(CORD ARMOR D10.1) FOR FIN, DEN, SWE, NOR
* 110 500-434Z CORD 1 (CORD ARMOR D10.1) FOR USA, CAN
* 110 500-439Z CORD 1 (CORD ARMOR D10.1) FOR AUS
* 110 500-423Z CORD 1 (CORD ARMOR D10.1) FOR KUW, SIN
* 110 500-456Z CORD 1 (CORD ARMOR D10.1) FOR CHN
* 110 500-435Z CORD 1 (CORD ARMOR D10.1) FOR HKG
* 110 500-455Z CORD 1 (CORD ARMOR D10.1) FOR THA
111 935-196
MACHINE SCREW (W/WASHERS) M4X12 (BLACK) 1
112 948-614 NYLON CLIP 1
2 - 08 - 5 -
*ALTERNATIVE PARTS
NO.
USED
CODE NO.
ITEM
NO.