Item Description
Date and time This indicates the date and time when the
processing request is received. The date and time
are output in the following format: YYYY-MM-
DDThh:mm:ss.sTZD.
Host information
The IP address of the LPAR manager is output.
1
Application information "LP" is output.
Process ID "-" is output.
Message ID The audited event ID defined by LPAR manager is
output.
2
Structure data part "-" is output.
Message See the table below.
The items are delimited by spaces.
Table 3-38 Message format
Item Description
Unified identifier "CELFSS" is output.
Unified specification revision
number
"2.0" is output.
Serial number of the message A value between 1 and 9999999999 is output. If
LPAR manager was shut down or restarted, the
value becomes to 1.
Message ID The auditing log ID defined by LPAR manager is
output.
2
Date and time This indicates the date and time when the
processing request is received. The date and time
are output in the following format: YYYY-MM-
DDThh:mm:ss.sTZD
Component name or process
name
"LP" is output.
Host name
The IP address of the LPAR manager is output.
1
Type of the audited event The event category such as information-browsing or
setting modification is output.
• Authentication: User authentication
• StartStop: Starting, restarting, and stopping
LPAR manager or LPARs
• ConfigurationAccess: Configuration changes
to LPAR manager or LPARs (including
configuration changes made along with status
changes)
• Maintenance: Operations other than the above
Result of the audited event One of the following values is output.
3-30
High Reliability Functions
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
