Table 7-23 Details of Shared FC Assignment Screen
No. Item Description
Default
Value
Supported
LPAR
manager
Version
(1) # Displays the LPAR numbers. - 01-0X~
(2) Name Displays the LPAR name. NO_NAME 01-0X~
(3) Sta Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due
to an unrecoverable failure. Reboot LPAR
manager when this happens. If rebooting
LPAR manager cannot solve the problem,
contact your reseller or consult
maintenance personnel.
Dea 01-0X~
(4) Shared
FC#
Displays the number of the shared FC. - 01-0X~
(5) Slot# Displays the number of the PCI slot into
which the FC is inserted.
- 01-0X~
(6) Port# Displays the shared FC port number. - 01-0X~
(7) PortStatus Displays the shared FC port status:
A: Available. Normal status
D: LinkDown. Unavailable because the
cable is not connected.
C: ConfigCheck. Unavailable due to
configuration problem.
E: ErrorCheck. Unavailable due to
unrecoverable failure.
- 01-0X~
(8) Shared FC
Assignment
Sets the shared FC port to each LPAR.
To assign the shared FC port, select the
shared FC port by eh cursor to display a
sub-screen and set VfcID.
"!" is displayed on the right of the slot
number when the PCI device is not
recognized for the reason that the PCI
device is removed through the hot-plug
operation or powered off due to a failure
causing the blockade of the PCI device.
* 01-0X~
(9) Selected
Virtual FC
Port WWN
Information
Displays the information on the shared FC
port selected by the cursor.
LPAR#: Displays the LPAR# to which the
shared FC is assigned.
WWPN: Displays WWPN of the shared FC.
WWNN: Displays WWNN of the shared FC.
- 01-0X~
Operation by LPAR manager Screen
7-57
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
