Hitachi CG 24EASP User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
BEFORE operating the power tool. Please keep this manual available for other users and owners before they
use the power tool. This manual should be stored in safe place.
WARRANTY: CG22EAB(SLP),
CG22EAB(L) are NOT intended for commercial use, and therefore, NO warranty is provided to their
commercial applications and rental applications.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit. Prière de
lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce mode d’emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi
doit être conservé dans un endroit sûr.
GARANTIE : Les modèles CG22EAB(SLP) et
CG22EAB(L) NE sont PAS destinés à un usage commercial, par conséquent, AUCUNE garantie n’est
fournie concernant toute utilisation commerciale ou locative.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede provocar lesiones
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este manual
ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras personas
antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
GARANTÍA: CG22EAB(SLP),
LOS CG22EAB(L) no están destinados a uso comercial y, por lo tanto, NO se garantizan sus aplicaciones
comerciales y aplicaciones de alquiler.
CG 22EAS (SLP)
CG 22EAS (SL)
CG 22EAS (S)
CG 22EAD (SLP)
CG 22EAD (SL)
CG 22EAB (SLP)
CG 22EAB (L)
CG 24EASP (SL)
CG 24EASP (S)
CG 27EASP (SL)
CG 27EASP (S)
Grass Trimmer/Brush Cutter
Coupe-Herbes/Débroussailleuse
Motoguadañas/Desbrozadoras
CG22EAS (SLP)
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
000CoverCG22EASUS.indd1000CoverCG22EASUS.indd1 2012/07/1014:57:052012/07/1014:57:05

Hitachi CG 24EASP Specifications

General

Brand	Hitachi
Model	CG 24EASP
Category	Trimmer
Language	English

Summary

Safety Instructions and Instruction Manual

Meanings of Symbols

What Is What

Warnings and Safety Instructions

Operator Safety

Guidelines for safe operation focusing on personal protective equipment and condition.

Unit/Machine Safety

Precautions for maintaining the tool's integrity and safe operation.

Fuel Safety

Critical safety measures for handling, storing, and using fuel.

Cutting Safety

Safety practices specific to the cutting attachment and working area.

Warranty Information

Specifications Overview

Assembly Procedures - Core Components

Drive Shaft to Engine Connection

Instructions for connecting the drive shaft to the engine unit.

Attachment Installation

Steps for securely attaching the cutting head or other attachments.

Handle Installation

Guidance on mounting and positioning the main handle.

Assembly Procedures - Controls and Guards

Throttle Wire and Stop Cord Connection

Connecting the throttle control and stop cord mechanism.

Blade Guard Installation

Proper mounting of the blade guard for safety.

Operating Procedures - Fuel

Fuel Handling and Safety

Guidelines for safe mixing, storing, and handling of fuel for the trimmer.

Operating Procedures - Starting

Fueling Procedure

Steps for safely adding fuel to the machine.

Engine Starting Steps

Detailed instructions on how to start the engine.

Operating Procedures - Cutting and Stopping

Cutting Operation Guidance

Techniques and safety tips for effective cutting.

Engine Stopping Procedure

Instructions on how to safely shut down the engine.

Maintenance - Engine and Controls

Carburetor Adjustment

Steps for adjusting the carburetor for optimal performance.

Idle Speed Adjustment

How to set and check the engine's idle speed.

Semi-Auto Cutting Head Operation

Function and operation of the semi-auto cutting head.

Maintenance - Filters and Shafts

Air Filter Cleaning and Replacement

Procedures for cleaning and replacing the air filter.

Fuel Filter Cleaning

Instructions on how to clean the fuel filter element.

Flexible Drive Shaft Lubrication

Guidance on lubricating the flexible drive shaft.

Maintenance - Cutting Head Components

Angle Transmission Lubrication

How to check and replenish grease in the angle transmission.

Nylon Line Replacement

Steps for replacing the nylon cutting line.

Maintenance - Blades and Schedule

Blade Installation and Care

Safe practices for installing, using, and maintaining cutting blades.

Maintenance Schedule Overview

Summary of recommended maintenance intervals and tasks.

Daily Maintenance Checks

Routine checks to perform before each use.

Weekly Maintenance Checks

Maintenance tasks recommended on a weekly basis.

Monthly Maintenance Checks

Maintenance tasks recommended on a monthly basis.