Hitachi CM802ET - TECHNICAL SPECIFICATIONS; CRT, Signal Input, Sync, Resolution; Clock Frequency, Viewable Size;Area; Colour Temp, Warm-up, Power

I SPEC/FICATIONS I
,.>...... . ...... .,,......... .......
CRT
,
Input Signal
.
Synchronization
Resolution
Video Clock Frequency
Viewable Image Size
VlewableImage Area
Colour Temperature
Warm-up Time
Power Supply
Dimensions
Weight
Environmental
Condition
E
m
~
21 inch picture tube, 0.22mm horizontal dot pitch, (0.21 mm ~
horizontal mask pitch).
Invar shadow mask, Black matrix,
Short persistence phosphors, New Anti-Reflection coat.
E
Video :0.7 Vp-p, Analog
Sync. : Separate H, V or Composite H/l/ lTL level
or sync. on Green at 0.3 Vp-p
CM802E/ET CM803ET
Horizontal : 31-100 kHz 31-115 kHz
Vertical : 50-160Hz 50-160
HZ
Horizontal : Up to 1,600 dots
Vertical : Up to 1,280 lines
802W= 803ET
200 MHz (max.)
240 MHz (max.)
20.0 inches (508 mm), diagonal
Horizontal :406 mm
Vertical :305 mm
Standard Colour Balance 1:9300 K
Standard Colour Balance 2:6500 K
Standard Colour Balance 3:5000 K
Colour Balance 4: User defined
30 minutes to reach optimum performance level.
AC100 -120 / 200-240 V, Automatically select.
Provided with Power Save Circuit.
Power Consumption : 130 W (nominal)
488 (W) x 474 (H) x 534 (D) mm
Including Tilt & Swivel base,
33 kg
Operation Storage
Temperature : 5°C to 35°C -20°C to 60”C
Humidity : 10% to 80Y. 10% to 90%
Specification and Design are subject to change without notice.
17