16
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER
MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
ON
OFF
㧗
FREEZE
Operating
1.
Press the VIDEO button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
Selecting an input signal (continued)
●
While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (
42). If the VIDEO button is
pressed when the COMPUTER IN1 or the COMPUTER IN2
port is selected, the projector will check the S-VIDEO port
first.
S-VIDEO VIDEO
VIDEO button
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER
MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
ON
OFF
㧗
FREEZE
MY SOURCE /
DOC. CAMERA button
1.
Press the COMPUTER button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN 1 COMPUTER IN 2
● While the ON is selected for the AUTO SEARCH item in
the OPTION menu, the projector will keep checking every
port sequentially till an input signal is detected (
42). If the
COMPUTER button is pressed when the VIDEO or S-VIDEO
port is selected, the projector will check the COMPUTER IN1
port first.
COMPUTER button
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH
BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER
MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
ON
OFF
㧗
FREEZE
1.
Press the MY SOURCE / DOC. CAMERA button on
the remote control. The input signal will be changed
into the signal you set as the MY SOURCE (
44).
● This function also can use for document camera. Select the
input port that connected the document camera.
To Next Page
Loading...
Need help?
General
