52
SECURITY menu
Item Description
MY TEXT 
DISPLAY
(1)  Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY 
TEXT DISPLAY and press the ► cursor (or the ENTER) button to display 
the MY TEXT DISPLAY on/off menu.
(2)  Use the ▲/▼ cursor buttons on the MY TEXT 
DISPLAY on/off menu to select on or off.
ON 
 OFF
When it is set to the ON, the MY TEXT will be 
displayed on the START UP screen and the 
INPUT_INFORMATION when the INFORMATION 
on the SERVICE menu is chosen.
• This function is available only when the MY TEXT 
PASSWORD function is set to the OFF.
MY TEXT 
WRITING
(1)  Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY 
TEXT WRITING and press the ► cursor (or the ENTER) button. The MY 
TEXT WRITING dialog will be displayed.
(2)  The current the MY TEXT will be 
displayed on the first 3 lines. If not yet 
written, the lines will be blank.  
Use the ▲/▼/◄/► cursor buttons and 
the ENTER (or the INPUT) button to 
select and enter characters. To erase 1 
character at one time, press the RESET 
(or press the ◄ cursor and the INPUT 
buttons at the same time) button. Also 
if you move the cursor to the DELETE 
or the ALL CLEAR on screen and press 
the ENTER (or the INPUT) button, 
1 character or all characters will be 
erased. The MY TEXT can be input up 
to 24 characters on each line.
(3)  To change an already inserted 
character, press the ▲/▼ cursor button 
to move the cursor to one of the first 3 
lines, and use the ◄/► cursor buttons 
to move the cursor on the character to 
be changed.
After pressing the ENTER (or the INPUT) button, the character is selected. 
Then, follow the same procedure as described at the item (2) above.
(4)  To finish entering text, move the cursor to the OK on screen and press 
the ► cursor (or the ENTER/
the 
INPUT) button. To revert to the previous 
MY TEXT without saving changes, move the cursor to the CANCEL on 
screen and press the ◄ cursor (or the ENTER/
the 
INPUT) button.
• 
The MY TEXT WRITING function is available only when the MY TEXT 
PASSWORD function is set to the OFF.