39
Function Description
Standby Mode
Use / to select a standby mode.
Normal
The projector is able to provide the following functions when it is in
standby mode.
• The projector can output a VGA signal when it is in standby
mode and the COMPUTER IN 1 port is correctly connected to
devices.
• The projector can play sound when it is in standby mode and the
corresponding ports are correctly connected to devices.
See "Connection" on page 12 for how to make the connections.
Saving
The projector consumes less than 0.5W power during standby when
this mode is selected. The Monitor out and Audio out functions are
disabled.
Lamp Settings
Lamp Mode
See "Setting Lamp Mode as Economic or Intelligent Eco" on page 43
for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 46 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 43 for details on how
the total lamp hour is calculated.
Security
Settings
See "Utilizing the password function" on page 19 for details.
Closed
Caption
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as "CC" in TV listings).
This function is only available when a Composite video or S-
Video input signal is selected and its system format is NTSC.
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Language, Mirror, High
Altitude Mode, Security Settings.
5. SYSTEM SETTING: Advanced menu
To Next Page
Loading...
