How to fix a Hitachi Projector that does not turn on?
If your Hitachi Projector does not turn on, ensure the power cord is securely plugged into both the AC inlet on the projector and a functioning power outlet, and that the power outlet switch is on. Also, if the projector is cooling down, wait until the process is complete before attempting to turn it on again.
What to do if my Hitachi CP-DX250 has no picture?
If your Hitachi Projector displays no picture, first ensure that the video source is turned on and correctly connected. Then, verify the projector is correctly connected to the input signal device. Finally, select the correct input signal using the SOURCE key on the projector or remote control.
How to fix a blurred image on my Hitachi Projector?
If the image on your Hitachi Projector is blurred, adjust the focus of the lens using the focus ring. If the issue persists, adjust the projection angle, direction, and height of the projector to properly align it with the screen.
Why does my Hitachi Projector remote control not work?
If your Hitachi Projector remote control isn't working, start by replacing the battery with a new one. If that doesn't solve the issue, check for any obstructions between the remote and the projector and remove them. Also, make sure you are within 4 meters (approximately 13 feet) of the projector.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Contrast Ratio | 2000:1 |
| Throw Ratio | 1.5 - 1.8:1 |
| Zoom Ratio | 1.2x |
| Projection System | 3LCD |
| Screen Size | 30 - 300 inches |
| Inputs | VGA, S-Video, Composite Video |
| Outputs | VGA, Audio |
Essential safety guidelines for operating the projector to prevent injury or damage.
Specifies environments and conditions to avoid for safe projector operation.
Lists the primary features and capabilities of the Hitachi projector.
Lists standard and optional accessories included with the projector package.
Details physical components, ports, and control panel buttons of the projector.
Explains remote control functions, battery replacement, and operating range.
Guides on selecting an appropriate location for projector installation based on room layout.
Provides a chart detailing projection sizes based on distance for optimal setup.
Outlines the general steps for connecting various devices to the projector.
Details connecting computers, monitors, and various video sources like HDMI, Component, S-Video, Composite.
Step-by-step guide on powering on and initializing the projector.
Explains how to navigate and use the projector's On-Screen Display (OSD) menus.
Details how to set, change, and use the projector's password security feature.
Guide on selecting and switching between different connected input sources.
Guides on adjusting projection angle, auto-adjusting, keystone correction, magnification, and aspect ratio.
Selecting preset modes, user modes, and adjusting brightness, contrast, color, tint, sharpness, and color temperature.
Fine-tuning color reproduction and configuring the presentation timer.
Controls for screen blanking, key lock, and operating in high altitudes.
Proper projector shutdown procedures and high altitude mode settings.
Overview of the projector's On-Screen Display (OSD) menu structure and available options.
Detailed explanation of functions within the Display menu.
Detailed explanation of functions within the Picture menu.
Explanation of Source menu functions and basic System Settings.
Explanation of advanced System Settings and the Information menu.
Guidelines for cleaning the lens, case, and storing the projector.
Details on lamp usage, extending life, replacement, and resetting the timer.
Explains projector indicator lights and their corresponding error statuses.
Addresses common problems like no power, no picture, blurred image, and remote control issues.
Detailed technical specifications including general, optical, electrical, mechanical, and environmental.
Lists terminals and specifies supported timings for various input signals.
Provides the physical dimensions and operating environmental requirements of the projector.
Compliance statements (FCC, ICES-003, WEEE) and disposal information.
Legal copyright notice, disclaimer, and warranty and after-service information.
To Next Page
