43
SCREEN menu
Item Description
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ORIGINAL
OFF
Feature
MyScreen
Screen can be registered by the MyScreen item
(
44 )
.
ORIGINAL Screen preset as the standard screen.
OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (
26 ) after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the ON is selected to the MyScreen P
ASSWORD item in
the SECURITY menu (
62 ), the ST
ART UP is fixed to MyScreen.
(continued on next page)
To Next Page
Loading...
