23
 Operating 
 1. 
 Press the 
AUTO button on the remote control.
Pressing this button performs the following. 
 Using the automatic adjustment feature 
     For a computer signal
 The vertical position, the horizontal position and the 
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its 
maximum size prior to attempting to use this feature. 
A dark picture may still be incorrectly adjusted. Use a 
bright picture when adjusting. 
     For a video signal and s-video signal
  The video format best suited for the respective input signal will be selected 
automatically. This function is available only when the AUTO is selected for 
the VIDEO FORMAT item in the INPUT menu ( 
  37 ). The vertical position 
and horizontal position will be automatically set to the default. 
    For a component video signal
 The vertical position, horizontal position and horizontal phase will be 
automatically set to the default. 
 ● The automatic adjustment operation requires approx. 10 seconds. Also 
please note that it may not function correctly with some input. When this 
function is performed for a video signal, a certain extra such as a line may 
appear outside a picture.
  ● The items adjusted by this function may vary when the FINE or DISABLE is 
selected for the AUTO ADJUST item of the SERVICE item in the OPTION 
menu ( 
ASPECT button on the remote control.  
Each time you press the button, the projector switches the mode for aspect 
ratio in turn.  
 Selecting an aspect ratio 
 ● 
*
16:10 / FULL: CP-WX11000 only. NATIVE: Except 
CP-X10000. SMALL: Except CP-WX11000.
● The NORMAL mode keeps the original aspect ratio of 
the signal. 
   
 For a computer signal
NORMAL   4:3    16:9    16:10
*
         SMALL
*
   NATIVE
*
   FULL
*
 
   
 For an HDMI or DVI-D signal
NORMAL   4:3    16:9    16:10
*
   14:9    SMALL
*
   NATIVE
*
   FULL
*
 
   
 For a video signal, s-video signal or component video signal
 4:3    16:9    16:10
*
   14:9    SMALL
*
   NATIVE
* 
   FULL
*
   
   
 For no signal 
4:3 (fi xed, except CP-WX11000) / FULL (fi xed, 
CP-WX11000) 
FREEZE
ASPECT
RESET
MENU
ENTER
SHUTTER
BLANK LASER
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
ID 3
ID 4
ID 2
ID 1
VIDEO
MY SOURCE