Hitachi CP-WX3030WN - Power on;off; Turning on the power; Turning off the power

26
Operating
Selecting an aspect ratio
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
● The display will be dark for a split second while switching the Aspect, but this
is not a malfunction.
 For a computer signal
CP-X2530WN/CP-X3030WN:
NORMAL  4:3  16:9  16:10
CP-WX3030WN:
NORMAL  4:3  16:9  16:10  NATIVE
 For a video signal, s-video signal or component video signal
CP-X2530WN/CP-X3030WN:
4:3  16:9  14:9
CP-WX3030WN:
4:3  16:9  16:10  14:9  NATIVE
 For an input signal from the LAN, USB TYPE A or USB TYPE B port, or
if there is no signal
CP-X2530WN/CP-X3030WN: 4:3 (fi xed)
CP-WX3030WN: 16:10 (fi xed)
1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
ASPECT button
 For an HDMI
TM
signal
CP-X2530WN/CP-X3030WN:
NORMAL  4:3  16:9  16:10  14:9
CP-WX3030WN:
NORMAL  4:3  16:9  16:10  14:9  NATIVE
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT
SEARCH
BLANK
MUTE
MY BUTTON
COMPUTER
MY SOURCE/
AUTO
MAGNIFY PAGE
DOWN
ON
OFF
FREEZE
UP
࡯
㧗
VOLUME

