OPTION menu
OPTION menu (continued)
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON 1
and 2 on the remote control (
6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button rst. Then
using the ▲/▼ buttons sets one of the following functions to the chosen
button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• HDMI: Sets port to HDMI.
• COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays the INPUT -INFORMATION- dialog (
45).
When an input signal is not found, the dialog is not displayed.
• AUTO KEYSTONE
:
Performs automatic keystone distortion correction (
34).
• MY MEMORY: Loads one of adjustment data stored (
28).
When more than one data are saved, the adjustment changes every
time the MY BUTTON is pushed.
When no data is saved in memory, the
dialog “No saved data” appears.
When the current adjustment is not saved
to memory, the dialog as shown in the right
appears.
If you want to keep the current adjustment, please press the ◄ button to
quit. Otherwise loading a data will lose the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (
24).
• FILTER RESET: Displays the lter time reset conrmation dialog
(
42).
• AV MUTE: Turns the picture and audio on/off.
• TEMPLATE: Makes the template pattern selected to the TEMPLATE
item (
40) appear or disappear.
MY SOURCE
Using ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
Select the picture input that is connected with a document camera.
COMPUTER (IN)1
ó
COMPUTER (IN)2
ó
HDMI
VIDEO
ó
S-VIDEO
ó
COMPONENT
SERVICE
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button to execute the item.
FAN SPEED
ó
AUTO ADJUST
ó
GHOST
ó
FILTER MESSAGE
FACTORY RESET
ó
INFORMATION
ó
REMOTE FREQ
ó
KEY LOCK
(continued on next page)
To Next Page
Loading...
