41
Operating
Using the EDGE BLENDING features
1. MODE (MANUAL)
OFF:
Disables the Blending function.
MANUAL: Allows you to adjust Blending Region or Blending Level by using menu.
•
IMAGE OPTIMIZER is not selectable when Blending is set to other than OFF.
•
ECO MODE is not selectable when Blending is set to other than OFF.
2. BLENDING LEVEL
Select BLENDING LEVEL with ▲/▼ buttons.
[1-25] can be selected with
◄/► buttons
.
Adjust the brightness of Blending Region according to the settings.
3. BLENDING REGION
3.1 Specifying Blending Region
Select one of the four sides with ▲/▼/
◄/► buttons
and press ENTER or
button. Blending Region can be speci ed for left and right sides with
◄/►
buttons
and for top and bottom sides with ▲/▼
buttons
.
Specify Blending Region for each projector.
Adjust them referring to the guide displayed during the adjustment of Blending
Region.
* The minimum value of Blending Region is 200 dots.
(continued on next page)
Guide line
Blend Region
Left Image
Right Image
To Next Page
Loading...
