Hitachi CP-WX625W - Page 27

27
3. Management with Web browser software
3.1 Conguring and controlling the projector via a web browser (continued)
Item Description
Image
Aspect Selects the aspect setting.
Over Scan Adjusts the over scan setting.
V Position Adjusts the vertical position.
H Position Adjusts the horizontal position.
H Phase Adjusts the horizontal phase.
H Size Adjusts the horizontal size.
Auto Adjust Execute Performs the automatic adjustment.
Input
Progressive Selects the progressive setting.
Video NR Selects the video noise reduction setting.
3D-YCS Selects the 3D-YCS setting.
Color Space Selects the color space.
Component Selects the
COMPONENT port setting.
C-Video Format Selects the video format setting.
S-Video Format Selects the s-video format setting.
HDMI Selects the HDMI setting.
Frame Lock-RGB1 Turns the frame lock-
RGB1 function on/off.
Frame Lock-RGB2 Turns the frame lock-
RGB2 function on/off.
Frame Lock-HDMI Turns the frame lock-
HDMI function on/off.
RGB in-1 Selects the
RGB1 input signal type.
RGB in-2 Selects the
RGB2 input signal type.
Setup
Auto Keystone
Execute
Performs the automatic keystone distortion setting.
Keystone V Adjusts the vertical keystone distortion setting.
Keystone H Adjusts the horizontal keystone distortion setting.
Whisper Selects the whisper mode.
Mirror Selects the mirror status.
Monitor Out-RGB1
Assigns the
MONITOR OUT when the RGB1 input port is
selected.
Monitor Out-RGB2
Assigns the
MONITOR OUT when the RGB2 input port is
selected.
Monitor Out-HDMI
Assigns the
MONITOR OUT when the HDMI input port is
selected.
Monitor Out-
Component
Assigns the
MONITOR OUT when the COMPONENT input
port is selected.
Monitor Out-S-Video
Assigns the
MONITOR OUT when the S-VIDEO input port is
selected.
Monitor Out-Video
Assigns the
MONITOR OUT when the VIDEO input port is
selected.
Monitor Out-Standby Assigns the
MONITOR OUT in the standby mode.