18
3. Management with Web browser software
3.1 Confi guring and controlling the projector via a web browser (continued)
3.1.5 Mail Settings
Displays and confi gures e-mail addressing settings.
Item Description
Send mail
Click [Enable] check box to use the e-mail function.
Confi gure the conditions for sending e-mail under the Alert
Settings.
SMTP Server Address
Confi gures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Sender E-mail address
Confi gures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Recipient E-mail address
Confi gures the e-mail address of up to fi ve recipients. You
can also specify [TO] or [CC] for each address. The length of
the recipient e-mail address can be up to 255 alphanumeric
characters.
Click [Apply] button to save the settings.
• You can confi rm whether the mail settings work correctly using [Send
Test Mail] button. Please enable Send mail setting before clicking [Send Test
Mail].
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
To Next Page
Loading...
