22
Operating
1.
1.
Press the
VIDEO button to select an input for video signal.
Each time you press the button, the projector switches its
video input port as below.
Press the
DIGITAL button to select an input for digital signal.
Each time you press the button, the projector switches its
digital input port as below.
Ɣ While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking every port sequentially till an input signal is detected (
VIDEO button is pushed when
COMPUTER IN2 port is
selected, the projector will check Component port fi rst.
Ɣ While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking every port sequentially till an input signal is detected (
DIGITAL button is pushed when Component,
VIDEO 2
port is selected, the projector will check
HDMI port fi rst.
COMPONENT (Y, Cb /Pb, Cr /Pr) Æ S-VIDEO Æ VIDEO 1 Æ VIDEO 2
HDMI DVI-D
1.
Press the
MY SOURCE button on the remote control. The
input signal will be changed into the signal you set as MY
SOURCE(
49).
Ɣ This function also can use for document camera. Select the input port that
connected the document camera.
LASER
INDICATOR
STANDBY/ON COMPUTER
MY SOURCE
Displaying and switching the image
COMPUTER IN1 Æ COMPUTER IN2 Æ BNC
1.
Press the
COMPUTER button to select an input port for the
RGB signal.
Each time you press the button, the projector switches its
RGB input port from the current port as below.
Ɣ While ON is selected for AUTO SEARCH item in OPTION menu, the
projector will keep checking every port sequentially till an input signal is
detected
(
COMPUTER button is pushed when
DVI-D port is selected, the projector will
check
COMPUTER IN1 port fi rst.
STANDBY/ON COMPUTER
ID 3ID 1
VIDEO
MY SOURCE
DIGITAL
ID 3
ID 4
ID 2
ID 1
VIDEO
LASER
INDICATOR
STANDBY/ON COMPUTER
To Next Page
Loading...
