EasyManua.ls Logo

Hitachi CP-X200 CP-X300 - Easy Menu

Hitachi CP-X200 CP-X300
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
EASY MENU
EASY MENU
Item Description
ASPECT
Using the / buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu
(
29).
AUTO
KEYSTONE
EXECUTE
Using the button executes the auto keystone function.
See AUTO KEYSTONE
EXECUTE item in SETUP menu
(
34).
KEYSTONE
Using the / buttons corrects the vertical keystone distortion.
See KEYSTONE
item in SETUP menu
(
34).
PICTURE MODE
Using the / buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
DAYTIME
WHITEBOARD
BOARD(GREEN)
COLOR TEMP GAMMA
NORMAL #2 MID DEFAULT #1 DEFAULT
CINEMA #3 LOW DEFAULT #2 DEFAULT
DYNAMIC #1 HIGH DEFAULT #3 DEFAULT
BOARD(BLACK) #4 Hi-BRIGHT-1 DEFAULT #4 DEFAULT
BOARD(GREEN) #5 Hi-BRIGHT-2 DEFAULT #4 DEFAULT
WHITEBOARD #2 MID DEFAULT #5 DEFAULT
DAYTIME #6 Hi-BRIGHT-3 DEFAULT #6 DEFAULT
When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to GAMMA (
26) and
COLOR TEMP (
26) items in PICTURE menu.
When this function is performed, a certain extra such as a line
may appear.
From the EASY MENU, items shown in the table below can
be performed.
Select an item using the / cursor buttons. Then perform
it according to the following table.
(continued on next page)

Other manuals for Hitachi CP-X200 CP-X300

Related product manuals