To Next PageTo Next Page
Need help?Do you have a question about the Hitachi CP-X2510N and is the answer not in the manual?
General| Number of colors | 16.78 million colors |
|---|---|
| Projection distance | - m |
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 15 - 106 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | XGA (1024x768) |
| Aspect ratio | 4:3, 16:9 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 317.5 x 287 x 116.8 mm |
| Power requirements | AC100 - 120V / AC220 - 240V 50/60 Hz |
| Connectivity technology | Wired |
| Lamp type | UHP |
| Lamp power | 210 W |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 6000 h |
| Focal length range | - mm |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 16 W |
| Number of built-in speakers | 2 |
| HDMI ports quantity | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | - |
| Component video (YPbPr/YCbCr) in | 3 |
| Wi-Fi | No |
| Power consumption (standby) | - W |
| Power consumption (typical) | 330 W |
| Noise level | 35 dB |
Weight and Dimensions| Weight | 3991 g |
|---|
Details critical warnings, cautions, and notice symbols for safe operation of the projector.
Provides information on manual updates, manufacturer responsibility, and content usage rights.
Guides users to verify all included items upon receiving the projector.
Details the external parts of the projector unit.
Lists warnings and cautions related to handling projector parts.
Explains the buttons and indicators on the projector's control panel.
Describes the input/output connectors located on the projector's rear panel.
Details how to position the projector for optimal viewing and ventilation.
Lists crucial safety advice for projector positioning and environment.
Instructs on connecting the projector to a computer network via LAN port.
Highlights critical safety precautions during device connection.
Explains the projector's compatibility with Plug-and-Play systems for easy computer connection.
Details how to safely connect the projector to a power source.
Explains how to use the projector's security features for theft prevention.
Lists warnings related to power connection and security device usage.
Guides users on how to insert batteries into the remote control.
Describes the effective range and angle for the remote control signal.
Details safety precautions for handling and disposing of batteries.
Provides steps to change the remote control's signal frequency if issues occur.
Describes how to use the remote control as a computer input device.
Warns about potential issues and proper usage of remote as input device.
Step-by-step guide on how to power on the projector.
Step-by-step guide on how to power off the projector.
Lists important safety warnings during power on/off operations.
Explains how to control the audio volume output.
Details how to silence the audio output briefly.
Guides users on switching between different video input sources.
Details how to select input sources using specific remote control buttons.
Explains how to automatically scan for active input signals.
Guides users on changing the screen's aspect ratio.
Explains how to use the projector's feet to level or tilt the unit.
Details how to set the screen size and image sharpness.
Warns about potential hazards when adjusting the projector's feet.
Explains how to automatically optimize picture settings.
Guides users on manually shifting the projected image.
Explains how to fix geometric distortion in the projected image.
Details how to zoom in on specific parts of the projected image.
Explains how to pause the current video image.
Details how to display a blank screen to hide the image.
Describes how to navigate and use the simplified menu options.
Explains how to navigate and use the comprehensive menu system.
Instructs on how to exit menu screens.
Explains the common terms and symbols used in menu displays.
Explains how to change the image aspect ratio from the Easy Menu.
Details how to perform automatic keystone correction via Easy Menu.
Guides on manually correcting vertical keystone distortion from Easy Menu.
Explains how to choose predefined picture settings from Easy Menu.
Describes how to activate or deactivate the power-saving Eco Mode.
Explains how to set the mirror display mode for the image.
Guides on resetting most Easy Menu settings to defaults.
Details how to view and reset the air filter's usage time.
Explains how to change the OSD display language.
Guides on navigating from Easy Menu to Advanced Menu sections.
Instructions on how to close the menu interface.
Explains how to control the image brightness level.
Guides on setting the difference between light and dark areas of the image.
Describes how to choose different gamma settings for image tone.
Explains how to set the overall color tint of the image.
Guides on adjusting the intensity of colors in the image.
Details how to adjust the color balance between green and red.
Explains how to control the clarity and detail of the image.
Describes the function that adjusts iris for optimal brightness in various scenes.
Explains how to save and load picture settings for quick recall.
Details how to adjust the image's width-to-height ratio.
Explains how to adjust the image scaling to fit the screen.
Guides on moving the image up or down on the screen.
Guides on moving the image left or right on the screen.
Explains how to correct image flicker by adjusting horizontal phase.
Guides on adjusting the width of the projected image.
Details how to automatically optimize image position and phase.
Explains settings for progressive scan video signals for sharper images.
Guides on reducing visual noise in video signals.
Details how to select appropriate color space modes for different signals.
Explains how to configure settings for component video inputs.
Guides on setting the video format for S-Video and Video inputs.
Explains how to set the signal type for computer inputs.
Details how to enable frame lock for smoother motion display.
Explains how to select and customize the display resolution for computer inputs.
Guides on performing automatic vertical keystone correction.
Explains how to manually adjust vertical keystone distortion.
Details how to activate or deactivate the power-saving Eco Mode.
Explains how to set the image to be displayed mirrored or inverted.
Guides on configuring the projector's standby power consumption modes.
Details how to arrange the output signal sent to the monitor port.
Explains how to control the audio output volume.
Guides on enabling or disabling the built-in speaker.
Details how to select audio inputs corresponding to video inputs.
Explains how to change the language of the on-screen display.
Guides on moving the menu display location on the screen.
Details options for the temporary blank screen feature.
Explains how to customize the screen displayed upon projector startup.
Guides on capturing custom images for startup or blank screens.
Explains how to lock MyScreen settings to prevent unauthorized changes.
Guides on enabling or disabling various system messages.
Explains how to assign custom names to input ports.
Guides on selecting predefined template screens.
Details how to configure closed caption display for video content.
Explains how to enable automatic scanning for input signals.
Guides on enabling automatic keystone correction.
Details how the projector can turn on automatically when power is supplied.
Explains how to set a timer for automatic projector shutdown.
Guides on viewing and resetting the projector lamp's operating hours.
Details how to view and reset the air filter's operating hours.
Explains how to program custom buttons on the remote control.
Guides on setting a preferred input for the 'My Source' function.
Explains how to adjust the cooling fan speed for different environments.
Details options for fine-tuning automatic picture adjustments.
Guides on correcting color ghosting artifacts in the image.
Explains how to manage filter replacement notifications.
Explains how to disable projector buttons to prevent accidental operation.
Guides on changing the remote control's operating frequency.
Introduces the configuration menu for serial communication.
Explains how to choose between RS-232C commands or Network Bridge.
Guides on setting baud rate and parity for serial communication.
Details how to select transmission methods for network bridge communication.
Explains how to set a timeout for device response in network communication.
Guides on setting a time limit for data transmission intervals.
Explains how to view details about the current input signal.
Guides on resetting all projector settings to factory defaults.
Explains how to access and navigate network settings.
Guides on enabling or disabling DHCP for IP address assignment.
Explains how to manually set the projector's IP address.
Guides on configuring the subnet mask for network addressing.
Details how to set the default gateway for network access.
Explains how to specify the DNS server address.
Guides on setting the time difference relative to the local time zone.
Details how to manually set the projector's internal clock.
Explains how to assign a name to the projector for network identification.
Guides on storing and displaying custom images via network.
Explains how to enable projector detection by AMX controllers.
Explains how to view current network configuration details.
Guides on restarting network functions for troubleshooting.
Explains how to change the projector's main security password.
Guides on setting a password to protect MyScreen images.
Explains how to enable a PIN code to restrict projector operation.
Guides on activating a feature that detects projector movement.
Explains how to password-protect custom text entries.
Guides on enabling or disabling the display of custom text.
Explains how to enter and edit custom text messages.
Provides detailed steps for replacing the projector's lamp unit.
Provides instructions for cleaning the projector's air filters.
Guides on replacing air filters and resetting their usage timer.
Lists crucial safety advice for handling air filters.
Explains how to replace the battery for the projector's internal clock.
Details safety precautions for handling and replacing batteries.
Advises professional inspection for internal cleaning and maintenance.
Provides steps for safely cleaning the projector lens.
Guides on cleaning the projector body and remote control.
Lists safety warnings for cleaning the projector.
Explains how to understand and resolve messages displayed by the projector.
Describes the meaning of different power, lamp, and temp indicator light combinations.
Provides further explanation of indicator lamp behavior and potential issues.
Explains how to perform an emergency shutdown if normal power off fails.
Guides on restoring all settings to factory defaults.
Addresses common power-related problems not caused by defects.
Addresses common sound and picture problems not due to defects.
Addresses picture quality problems not caused by defects.
Lists key technical data like panel resolution, lamp, power, and dimensions.
Details all available input and output ports on the projector.
Lists available optional accessories for the projector.
