Item Description
WIRELESS
INFORMATION
Selecting this item displays the WIRELESS INFORMATION dialog
for viewing the wireless LAN settings. Use the ▲/▼ buttons to
switch the page.
The rst page shows the wireless LAN settings. The second and
subsequent pages display the signal information of wireless LAN
connection devices.
• For details of PASSCODE, refer to the manual for “LiveViewer”.
• Nothing (blank) is shown in the PROJECTOR NAME (
70) and
SSID (
66) field until you setup those items. Only the first 16
characters of the PROJECTOR NAME and SSID are displayed.
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
“0.0.0.0” in the following condition.
(1) The USB wireless adapter is not inserted into the projector.
(2) DHCP is ON and the projector does not get address from DHCP
server.
• Nothing (blank) is shown in the MAC ADDRESS, CH and SPEED
elds if the USB wireless adapter is not inserted.
• The actual performance and setting will be shown in the CH and
SPEED eld, instead of the setting value in the WIRELESS SETUP
menu.
• An icon is displayed to the left of the SSID of the device connected
to the projector.
(continued on next page)
To Next Page
Loading...
