29
Fixing the Handle
THE HANDLE
Caring for the inside of the projector :
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years. Never try to care for the inside of the unit
yourself. Doing so is dangerous.
Caring for the lens :
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the
lens directly with your hand.
Caring for the cabinet and remote control transmitter :
Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a
neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly
with a soft, dry cloth.
ATTENTION • Make sure to turn off the power and unplug the power cord before caring for
the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector
correctly.
• Do not use cleaners or chemicals other than those listed above, including benzene and paint
thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
CAUTION • Make sure the handle is fixed before carrying the projector with the
handle. If the projector should be dropped from the handle should be off, it could
result in an injury, and continued use could result in fire or electrical shock. Do not
flourish the projector with the handle.
OTHER CARE
1
Raise up the handle hook, and pass one
end of the handle through the hole of
handle hook.
2
Buckle the end of the handle, as the
right drawing.
3
Fix the other end of the handle to the
other handle hook in the same way.
Fix the enclosed handle if you need.
01CPX385/EN最終02.11.74:15PMページ29
To Next Page
Loading...
Need help?
General