To Next Page

To Previous Page

PICTURE 1 Menu

PICTURE 2 Menu

With the PICTURE 1 menu, the five items shown in the Table

below can be performed.

Perform each operation in accordance with the instructions in the

Table.

With the PICTURE 2 menu, the five items shown in the Table

below can be performed.

Perform each operation in accordance with the instructions in the

Table.

Item Description

COLOR BAL R

Adjust Red Color Balance: Dark ⇔ Light

COLOR BAL B

Adjust Blue Color Balance: Dark ⇔ Light

SHARPNESS

Adjust Sharpness (for VIDEO/S-VIDEO): Clear ⇔ Soft

COLOR

Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):

Dark ⇔ Light

TINT

Adjust Tint (for VIDEO/S-VIDEO): Green ⇔ Red

PICTURE1 Menu

Item Description

V POSITION

Adjust Vertical Position (for RGB): Up ⇔ Down

H POSITION

Adjust Horizontal Position (for RGB): Left ⇔ Right

H PHASE

Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):

Right ⇔ Left

• Adjust to eliminate flicker.

H SIZE

Adjust Horizontal Size (for RGB): Large ⇔ Small

• If the horizontal size adjustment is excessive, the image may not be displayed

correctly. In such a case, initialize H SIZE with the RESET button.

OVER SCAN

Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):

LARGE ⇔ MIDDLE ⇔ SMALL

• It is recommended to select SMALL to avoid flicker at the lower part of the

picture.

PICTURE2 Menu

Example : PICTURE1 Menu

(COLOR BAL R)

Example : PICTURE2 Menu

(V POSITION)

: SELECT

MAIN

PICTURE-1

PICTURE-2

INPUT

SCREEN

OPTION