12
Setting up
Connecting with your devices (continued)
Computer
Access
point
USB
storage
device
(
64)
(78)
(64)
(55)
(61)
(continued on next page)
• If an oversized USB storage device blocks the LAN port, use a USB
extension cable to connect the USB storage device.
NOTE
► Before connecting the projector to a network system be sure
to obtain the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive
voltage.
►Before removing the USB storage device from the port of the projector, be
sure to use the REMOVE USB function on the thumbnail screen to secure your
data. (80)
CAUTION
To Next Page
Loading...
