16
Communication settings
For communication setting, use the OPTION - SERVICE - COMMUNICATION
menu. (OPTION menu - SERVICE - COMMUNICATION in the User's Manual
- Operating Guide)
Item Condition
BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps
Data length 8 bit (xed)
PARITY NONE/ODD/EVEN
Start bit 1 bit (xed)
Stop bit 1 bit (xed)
Transmission method HALF-DUPLEX/FULL-DUPLEX
NOTE •
For connecting the projector to your devices, please read the
manual for each device and connect them correctly with suitable cables.
•
Turn off (the power of ) both the projector and other devices and unplug
before connecting them.
•
For details of Transmission method, refer to 3.8.4 Transmission method-
Network Guide.
Network Bridge Communication
To Next Page
Loading...
