54
NETWORK Menu
Item Description
TIME
DIFFERENCE
Entering the TIME DIFFERENCE :
Use the ▲/▼ buttons to enter the
TIME DIFFERENCE.
Set the same TIME DIFFERENCE
as the one set on your PC. If unsure,
consult your network administrator.
Use the ◄ button to return to the menu
after setting the TIME DIFFERENCE.
DATE AND TIME
Entering DATE AND TIME :
Use the ▲/▼/◄/► buttons to enter the Year (last two digits),
Month, Date, Hour and Minute.
•
The projector will override this setting and retrieve DATE AND TIME
information from the Timeserver when SNTP is enabled. See [Date/
Time Settings] in [User’s Manual - Network Functions: Conguring
and Controlling the Projector via a Web Browser] for SNTP settings.
e-SHOT
e-SHOT display :
Use the ▲/▼ buttons to select an item and the ► or ENTER
buttons to display the image.
Image1
Image2
Image3
Image4
File names of registered images are
displayed by 16 characters or less.
Example: DEMONSTRATION-01
“NEW” stamp is added to the head
of line when the image is registered
newly. After the image is displayed,
“NEW” stamp will be erased.
Once an image is displayed, you can
use the ▲/▼ buttons to page through
the images. Use the ◄ or ESC buttons
to return to the menu.
Pressing the RESET button or the ► button for about 3 seconds
while an image is being displayed will display the RESET menu.
The displayed image can be deleted from the RESET menu using
the ENTER button on the remote control or the INPUT button on the
projector.
If you do not wish to delete the image use the ESC button on the remote
control or push the
◄
and INPUT buttons on the projector at the same time.
•
Items with no image stored cannot be selected.
•
Images can be changed using the
▲/▼
buttons while the image data downloads.
NETWORK Menu (continued)
To Next Page
Loading...
