
Do you have a question about the Hitachi CP-X8160 and is the answer not in the manual?
| Matrix size | 0.8 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| Projection distance | 0.9 - 36.8 m |
| Projection technology | LCD |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 30 - 600 \ |
| Projector native resolution | XGA (1024x768) |
| Audio input | 3 |
| RS-232 ports | 1 |
| Connectivity technology | Wired |
| Zoom capability | Yes |
| Focal length range | - mm |
| Lamp type | UHP |
| Lamp power | 330 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | - h |
| 3D | - |
| Full HD | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA) |
| RMS rated power | 16 W |
| Number of built-in speakers | 2 |
| BNC input ports | 5 |
| USB connector type | USB Type-A, USB Type-B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Noise level | - dB |
| Certification | UL/cUL, FCC Part15 class A, AS/NZS CISPR22 class A, CE, GOST-R |
| Placement | Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| Power consumption (standby) | - W |
| Operating temperature (T-T) | 0 - 45 °C |
| Sustainability certificates | RoHS |
| Depth | 396 mm |
|---|---|
| Width | 498 mm |
| Height | 135 mm |
| Weight | 8700 g |
Covers arrangement, installation, and connecting various devices to the projector.
Instructions for connecting the projector to a power supply for operation.
Guides on turning the projector on and off, including status indicators.
Details on installing batteries, using the remote ID, and PC mouse/keyboard functions.
Procedures for replacing the lamp and cleaning the air filter.
Loading...